Kingston 2GB DDR3 1600MHz CL11 Sodimm KVR16S11S6/2G Notebook Ram

Kingston 2GB DDR3 1600MHz CL11 Sodimm KVR16S11S6/2G Notebook Ram

Teknik Özellikler

CL11'e bir de Sodimm eklenirse ne mi olur? Teknolojinin adresi Kingston ile 2 GB bellek kapasitesi ve Bellek türü olarak DDR3'e ulaşıp hızı yaşayacaksınız.

Öte yandan bellek hızının da 1600 MHz'ye kadar ulaştığı Kingston CL11 sodimm özellikleri şu şekilde

BELLEK KAPASİTESİ: 2 GB 
 

BELLEK TÜRÜ: DDR3 
 

BELLEK HİZİ: 1600 MHZ 
 

EK ÖZELLİKLER: CL11

KVR16S11S6/2
2GB 1Rx16 256M x 64-Bit PC3-12800
CL11 204-Pin SODIMM
DESCRIPTION
This document describes ValueRAM's 256M x 64-bit (2GB)
DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx16,
memory module, based on four 256M x 16-bit FBGA components.
The SPD is programmed to JEDEC standard latency
DDR3-1600 timing of 11-11-11 at 1.5V. This 204-pin SODIMM
uses gold contact fingers. The electrical and mechanical
specifications are as follows:
FEATURES
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6, 5
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 1.180” (30.00mm), single sided component